TEIN Sport Coilovers for 2024+ | KYP – KYP Performance House

08 9470 3828 | info@kyp.com.au

Tein Sport Coilover Kit – Toyota Land Cruiser / Prado (2024+) Lift Suspension Kit

-10%

$1,939.50

$2,155.00

Tax Included

Brand: TEIN

Availability: In Stock

SKU: VSBME-W1HA1

Qty:

Tags: 2024 , land-cruiser , suspension , tein , toyota

Estimated Shipping (Australia)

Shipping shown is an estimate. Final cost calculated at checkout.

Description

Description

Upgrade your Toyota Land Cruiser / Land Cruiser 250 / Prado (2024+) with the Tein VSBME-W1HA1 Sport Coilover Kit, designed to deliver increased ride height, improved off-road capability, and enhanced load handling performance. Built for SUVs and 4WD platforms, this kit provides a controlled lift setup while maintaining stability and ride comfort.

Key Features:

Lift-Up Suspension Design: Increase ground clearance for better off-road performance.
Front Ride Height Adjustment: Adjustable lift depending on model and setup.
High-Strength Springs Included: Designed to handle heavier SUV loads and rough terrain.
Improved Stability & Control: Enhances handling for both on-road and off-road driving.

Performance Specs (Front):

Lift range:
- Approx. +45mm to +75mm (varies by model)
Spring rate: 11.1K

Vehicle Compatibility:

Toyota Land Cruiser (2024+ USA, 2.4L, TJH250L)
Toyota Land Cruiser 250 (2024+ JPN, TRJ250W, VX)
Toyota Land Cruiser Prado (2024+ CHN, TJH251L)

Important Notes:

Front kit only – must be purchased together with VSBMF-W1HA2 (rear kit).
Backup light position may need adjustment after installation (JPN models).
Designed specifically for lift applications—ideal for off-road builds and overlanding setups.

Built for Off-Road & Adventure
This kit is perfect for drivers looking to achieve a higher stance, better clearance, and improved capability without compromising reliability and ride quality.

Note: Product images are for reference only. Your VSBME-W1HA1 kit is vehicle-specific. Contact us for fitment and bundle recommendations.

TEIN SPORT COILOVER KIT (FRONT ONLY)

Part Number: VSBME-W1HA1 | RRP: AUD $2,155.00 (inc. GST) | Stock: In Stock

⚠️ CRITICAL PURCHASE REQUIREMENT:
• This kit MUST be purchased together with VSBMF-W1HA2
• CANNOT be purchased alone
• This is a front-only coilover kit designed to pair with the rear kit

PRODUCT INFORMATION
PRODUCT NAME	TEIN Sport Coilover Kit (Front Only)
PART NUMBER	VSBME-W1HA1
RRP (inc. GST)	AUD $2,155.00
STOCK	✅ In Stock
PAIR WITH	VSBMF-W1HA2 (Required)

FEATURES
SPRINGS INCLUDED	✅ Yes
DAMPING ADJUSTMENT	✅ Yes
FULL-LENGTH HEIGHT ADJUST	✅ Yes
UPPER MOUNT	Pillow Upper (P/U)
EDFC COMPATIBLE	✅ Yes

🔧 FRONT SPRING SPECIFICATIONS

FRONT SPRING

Spring Rate	616 lbs/in / 11.1 kgf/mm
Free Length	399 mm
Recommended Height Range	+45mm to +70mm (varies by model)

REAR

Status	Separate kit required
Pair With	VSBMF-W1HA2

📏 RIDE HEIGHT SPECIFICATIONS (FRONT ONLY)

VEHICLE	MARKET	RIDE HEIGHT CHANGE	ADJUSTABLE RANGE	RECOMMENDED RANGE
Land Cruiser (TJH250L)	USA	+60mm	+60 to +75	+60 to +70
Land Cruiser 250 (TRJ250W)	Japan	+45mm	+45 to +60	+45 to +55
Land Cruiser Prado (TJH251L)	China	+55mm	+50 to +65	+50 to +60

📋 VEHICLE FITMENT GUIDE

MAKE	MODEL	YEAR	CHASSIS	GRADE	ENGINE	DRIVE	MARKET
TOYOTA	LAND CRUISER	2024+	TJH250L	—	2.4L Turbo	4WD	USA
TOYOTA	LAND CRUISER 250	2024.04+	TRJ250W	VX	2.7L	4WD	Japan
TOYOTA	LAND CRUISER PRADO	2024+	TJH251L	—	2.4L Turbo	4WD	China

📝 IMPORTANT NOTES:
• This is a LIFT KIT (increases ride height, does not lower)
• FRONT ONLY coilover kit - requires separate rear kit
• MUST be paired with VSBMF-W1HA2 for complete installation
• Pillow Upper (P/U) mounts included on front

📋 JAPAN SAFETY REGULATION NOTE:
For Japan market vehicles: Backup light position needs to be adjusted if backup light height does not meet Japan's vehicle safety regulations (height: 1200mm or less).

* Specifications are subject to change without notice. Please verify fitment before purchase.