TEIN 4x4 Damper Sport Coilovers for Performance | KYP

08 9470 3828 | info@kyp.com.au

TEIN 4X4 DAMPER SPORT STRUT SET - JIMNY 18+

-10%

$1,313.10

$1,459.00

Tax Included

Brand: TEIN

Availability: In Stock

SKU: VSUC2-F1SS2

Qty:

Tags: suspension , tein

Estimated Shipping (Australia)

Shipping shown is an estimate. Final cost calculated at checkout.

Description

Description

TEIN STREET COILOVER KIT

Part Number: VSUC2-F1SS2 | RRP: AUD $1,495.00 (inc. GST) | Stock: Low Stock

⚠️ IMPORTANT NOTES – JAPAN MARKET:
• NOT ride height adjustable – Fixed lift height (+55mm front / +40mm rear)
• Additional device (such as mirror or camera) is required to secure front vision to comply with Japan's vehicle safety regulations on forward/lateral field visions
• Replacement of brake hose (with 50mm+ longer than OE) and locking hub vacuum hose is required
• Replacement of caster-correction bushings and lateral rod is recommended
• FRONT: When tightening, be sure to apply the appropriate torque as specified in the included manual. Over-torquing might lead to piston rod damage/breakage
• REAR: Right and left springs differ – be sure to install on the correct side

PRODUCT INFORMATION
PRODUCT NAME	TEIN Street Coilover Kit
PART NUMBER	VSUC2-F1SS2
RRP (inc. GST)	AUD $1,495.00
STOCK	⚠️ Low Stock

FEATURES
SPRINGS INCLUDED	✅ Yes
DAMPING ADJUSTMENT	✅ Yes (16-level)
FULL-LENGTH HEIGHT ADJUST	❌ No (Fixed lift height)
UPPER MOUNT	Standard (F/R)
EDFC COMPATIBLE	✅ Yes

🔧 SPRING SPECIFICATIONS

FRONT SPRING

REAR SPRING

Spring Rate	140 lbs/in / 2.5 kgf/mm (2.5K)
Free Length	366 mm
I.D. (Inner Diameter)	—

Spring Rate	123 lbs/in / 2.2 kgf/mm (2.2K)
Free Length	333 mm
Note	Right and left springs differ – install on correct side

📏 RIDE HEIGHT & ALIGNMENT SPECIFICATIONS

FRONT

Ride Height Change	+55mm (Fixed Lift)
Adjustable Range	Fixed – Not adjustable
Upper Mount	Standard (STD)

REAR

Ride Height Change	+40mm (Fixed Lift)
Adjustable Range	Fixed – Not adjustable
Upper Mount	Standard (STD)

📋 VEHICLE FITMENT GUIDE

📝 IMPORTANT NOTES:
• UPPER MOUNTS: Standard (STD) both front and rear
• Spring rates: Front 2.5K (140 lbs/in) / Rear 2.2K (123 lbs/in)
• LIFT KIT: Fixed lift height – Front +55mm / Rear +40mm (Not adjustable)
• REAR: Right and left springs differ – be sure to install on the correct side
• FRONT TORQUE SPECIFICATION: When tightening, apply appropriate torque as specified in included manual. Over-torquing might lead to piston rod damage/breakage
• JAPAN REGULATIONS: Additional device (mirror or camera) required to secure front vision to comply with safety regulations
• REQUIRED REPLACEMENTS:
– Brake hose (with 50mm+ longer than OE)
– Locking hub vacuum hose
• RECOMMENDED REPLACEMENTS: Caster-correction bushings and lateral rod
• Compatible with TEIN EDFS (Electronic Damping Force Controller)
• Fits Suzuki Jimny JB64W (660cc) and Jimny Sierra JB74W (1.5L) 2018+
• Japan market specifications shown

* Specifications are subject to change without notice. Please verify fitment before purchase. Lift kit has fixed ride height (non-adjustable). Rear springs are side-specific. Front torque specifications must be followed exactly to avoid piston rod damage. Brake hose and vacuum hose replacement required. Additional front vision device required for Japan market compliance.