08 9470 3828 | info@kyp.com.au
WhatsApp
LINK LS GEN 3 KNOCK ADAPTER LOOM
LINK LS GEN 3 KNOCK ADAPTER LOOM

LINK LS GEN 3 KNOCK ADAPTER LOOM

-5%

$41.80

$44.00

Tax Included
Brand: LINKECU
Availability: In Stock
SKU: 101-0305
Tags: link , linkecu , wiring harness

Estimated Shipping (Australia)

    Shipping shown is an estimate. Final cost calculated at checkout.

    $41.80

    $44.00

    Intended for use with our terminated LS engine harness. Plug and play compatibility with factory Gen 3 Knock Sensor loom (located in the valley). 

    Related Products

    Order online and have your products delivered to your closest store for free
    -5%
    LINK RAZOR PDM LINK RAZOR PDM

    LINK RAZOR PDM SKU: 135-1000

    Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.The Razor PDM is...

    -5%

    $1,358.50

    $1,430.00

    -5%
    LINK CANTEE - LINK CAN SPLITTER CABLE LINK CANTEE - LINK CAN SPLITTER CABLE

    LINK CANTEE - LINK CAN SPLITTER CABLE SKU: 101-0212

    CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to 2 x DTM4 Male....

    -5%

    $65.55

    $69.00

    -5%
    LINK ECU - Link CAN Gauge OLED 52mm LINK ECU - Link CAN Gauge OLED 52mm

    LINK ECU - Link CAN Gauge OLED 52mm SKU: 101-0226

    The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters such as boost pressure, air/fuel ratio, coolant temperature, fuel...

    -5%

    $558.60

    $588.00

    -5%
    LINK CAN LAMBDA DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR LINK CAN LAMBDA DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR

    LINK CAN LAMBDA DIGITAL WIDEBAND CAN MODULE WITH B SKU: 125-1000

    Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN...

    -5%

    $574.75

    $605.00

    -5%
    LINK REMOTE E-THROTTLE (DBW) LINK REMOTE E-THROTTLE (DBW)

    LINK REMOTE E-THROTTLE (DBW) SKU: 115-1000

    Link's external E-throttle (Drive by Wire) module works with Link's G4X ECUs (except the entry level AtomX), plus G4+ ECUs (Storm and above) to give you full control of your...

    -5%

    $480.70

    $506.00

    -5%
    LINK CANJST CAN Connection Cable for Plugin ECU's (5pin) LINK CANJST CAN Connection Cable for Plugin ECU's (5pin)

    LINK CANJST CAN Connection Cable for Plugin ECU's SKU: 101-0197

    Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via...

    -5%

    $53.20

    $56.00

    Recently Viewed Products