LINK CAN LAMBDA DIGITAL WIDEBAND CAN MODULE WITH

Description

Description

Links CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.

If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertable CAN plug.

The CAN-Lambdas ability to measure the proportion of oxygen in exhaust gases makes it an essential tool for accurately tuning fuel mixtures as well allowing your ECU to make tuning adjustments

on the fly.

Being fully digital the CAN Lambdas powerful LSU 4.9 sensor will eliminate any loss of signal, risk, delays and errors that analogue alternatives cause. The CAN-Lambda never requires free air calibration.

Specifications

1 x 4 pin male DTM connector (power/CAN)

1 x 6 pin mating connector for LSU 4.9 Lambda sensor

Dimensions

Enclosure 60 x 26 x 15mm

Lead length 170mm

Weight 70g

Input Voltage

Controller 7.5 - 20 V

Sensor 10.8 - 16.5 V

Input Current

Controller 100 mA

Sensor Heater 8 A

Operating Temp -20 - 100 deg.C

Sensor Bosch LSU4.9

Sensing Range 0.67 - 10 lambda

CAN Frequency 1Mb/s,500kb/s,250kb/s,125kb/s

Related Products

Order online and have your products delivered to your closest store for free

-10%

HALTECH CAN Keypad 8 button (2x4) - HT-011501 SKU: HT-011501

KEYPAD OVERVIEW The Haltech CAN Keypad is a plug and play control solution for your Haltech system. With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to...

-10%

$463.50

$515.00

-10%

LINK RAZOR PDM SKU: 135-1000

Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.The Razor PDM is...

-10%

$1,287.00

$1,430.00

-10%

LINK REMOTE E-THROTTLE (DBW) SKU: 115-1000

Link's external E-throttle (Drive by Wire) module works with Link's G4X ECUs (except the entry level AtomX), plus G4+ ECUs (Storm and above) to give you full control of your...

-10%

$455.40

$506.00

-10%

LINK CANTEE - LINK CAN SPLITTER CABLE SKU: 101-0212

CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to 2 x DTM4 Male....

-10%

$62.10

$69.00

-10%

LINK CANJST CAN Connection Cable for Plugin ECU's (5pin)

LINK CANJST CAN Connection Cable for Plugin ECU's SKU: 101-0197

Used to add CAN communications to G4+/G4X Plugin ECUÃ¢â¬â¢s which have a 5 Pin CAN connector.Â Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via...

-10%

$50.40

$56.00