• New
HKS HIPERMX S SERIES COILOVERS SUSPENSION TYPE for Toyota GR YARIS (GXPA16) Gen2 TOYOTA GR COROLLA GZEA14H G16E-GTS : KYP PERFOR

HKS HIPERMAX S SERIES COILOVERS SUSPENSION TYPE for Toyota GR YARIS (GXPA16) Gen2 TOYOTA GR COROLLA GZEA14H G16E-GTS

HKS
80300-AT035
$4,046.11
Tax included
Quantity
200 Items

Why Buy From Us?

  • ✔ Australian Company
  • ✔ 100% Fitment Guarantee
  • ✔ Genuine Quality Brands

S

  • Without compromising the OEM ride quality, we have improved the ride comfort required for everyday use and sports performance such as roll rigidity in a well-balanced way.
  • The upper mount shape has been changed in the Gen2. A reinforced rubber mount has been adopted for the HKS original dedicated upper plate. Aiming for a damping characteristic that is smooth and supple while also having a stiff feel, stability and controllability at the limit have also been significantly improved.
  • Rather than using the same settings as the previous model, we have performed special tuning to match the dynamic characteristics in the Gen2.
  • We also tested the newly added AT vehicle. Concluding, it provides the best ride comfort for both MT and AT vehicles.

Application

Engine G16E-GTS
Model Year 24/04 - 
Remarks

Specification

  FRONT REAR
Damping force adjustment 30 steps 30 steps
Base valve - -
Height adjustable lower bracket 〇 〇
Upper mount Rubber Rubber
Inverted/Normal type Inverted Normal
Damper/Spring layout Coilover Separated
Spring rate change at factory Possible Possible
Damping force adjustment with wire - -
Helper spring
(Spring rate N/mm)		 - -
Ride Heightmm
  Factory *2 Test data Adjustable range
High - Low *3		 Drivable range
High - Low *4
FRONT Ride height *1 654 651 681 ～ 615 681 ～ 615
Against stock -27 -30 0 ～ -66 0 ～ -66
REAR Ride height *1 651 654 678 ～　618 678 ～　618
Against stock -26 -23 1 ～ -59 1 ～ -59

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

Kit information

Spring of Full Kit

  F R
Spring rate N/mm(kgf/mm) 69 ( 7.0 ) 59 ( 6.0 )
Free height (mm) 200 250
Spring type Straight Barrel type Straight Barrel type
Recommended range to change spring rate N/mm(kgf/mm) +10 ( 1 ) ※ +10 ( 1 )

Specification of damper

  F R
Damping force (Rebound/Damping)N* 593 / 471 363 / 432
Default position of dial 15 15
Remaining damper stroke (Rebound/Damping)mm 47 / 59 52 / 62

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

  F R
Default Test Drivable limit
High *		 Drivable limit
Low *		 Default Test Drivable limit
High *		 Drivable limit
Low *
Length of
case (mm)		 331 328 358 292 278 280 298 253
Spring
Set length(mm)		 203 ← 203 203 - - - -
Length to ride hight
adjuster (mm)		 41 38 68 2 40 42 59 17
Lever ratio 1.00 1.42(spg) , 1.32(dmp)

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.



Test vehicle information

  F R
Vehicle weight kg 775　(770) 511　(510)
Tire size (Air pressure) kPa 225 / 40 - 18 ( 220 ) 225 / 40 - 18 ( 200 )
Wheel size 8 JJ × 18 inset 45 8 JJ × 18 inset 45
Alignment
(Toe/Camber)		 Test data 0 mm / -2°30' 0mm / -2°10'
Standard value in 1.6 ± 2 mm / -1°24' ± 0°45' in 2.3 ± 2 mm / -1°56' ± 0°45'

* Test data at HKS.

Parts List　* It may be changed without prior notice.

 

■Differences from the Gen1 vehicle

The upper mounting shape of the front suspension on the Gen1 vehicle was a single center bolt. In Gen2, that was strengthened to three bolts, and HKS has equipped the vehicle with its own original upper mount. The reinforced rubber mount provides a direct response and absorbs unpleasant vibrations from the road surface. It bears the HKS HIPERMAX logo and can be seen from the engine bay. It is made of steel to ensure strength and impact resistance.

Gen1: Center-fastened genuine upper was used.

Gen2：Equipped with HKS original upper mount.

80300-AT035
200 Items
Related Products ( 16 other products in the same category )