• -5%
  • New
HKS Coilover Suspension Full Kit Hipermax S - GR Yaris GXPA16 : KYP Performance House

HKS Coilover Suspension Full Kit Hipermax S - GR Yaris GXPA16

HKS
80300-AT025
$3,279.80
$3,115.81 Save 5%
Tax included
Quantity
20 Items

Why Buy From Us?

  • ✔ Australian Company
  • ✔ 100% Fitment Guarantee
  • ✔ Genuine Quality Brands

S

Going beyond just ride comfort or handling performance, a new standard of "Driving Comfort" aims for comfort in ride but also in the peace of mind generated by handling performance and drivability . An uncompromising balance which delivers on all the demands of street driving.



The model in the photo is GXPA16.

Application

Engine G16E-GTS
Model Year 20/09 - 24/03
Remarks Developed at RZ High performance 1st edition

Specification

  FRONT REAR
Damping force adjustment 30 steps 30 steps
Base valve - -
Height adjustable lower bracket 〇 〇
Upper mount Stock Rubber
Inverted/Normal type Inverted Normal
Damper/Spring layout Coilover Separated
Spring rate change at factory Possible Possible
Damping force adjustment with wire - -
Helper spring
(Spring rate N/mm)		 - -
Ride Heightmm
  Factory *2 Test data Adjustable range
High - Low *3		 Drivable range
High - Low *4
FRONT Ride height *1 654 ← 679 ～ 634 679 ～ 634
Against stock -25 ← 0 ～ -45 0 ～ -45
REAR Ride height *1 651 ← 677 ～　630 677 ～　630
Against stock -26 ← 0 ～ -47 0 ～ -47

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

Kit information

Spring of Full Kit

  F R
Spring rate N/mm(kgf/mm) 69 ( 7.0 ) 59 ( 6.0 )
Free height (mm) 200 250
Spring type Straight Barrel type Straight Barrel type
Recommended range to change spring rate N/mm(kgf/mm) +10 ( 1 ) ※ +10 ( 1 ) ※

Specification of damper

  F R
Damping force (Rebound/Damping)N* 603 / 490 363 / 452
Default position of dial 15 15
Remaining damper stroke (Rebound/Damping)mm 45 / 61 49 / 65

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

  F R
Default Test Drivable limit
High *		 Drivable limit
Low *		 Default Test Drivable limit
High *		 Drivable limit
Low *
Length of
case (mm)		 301 ← 326 281 273 ← 290 255
Spring
Set length(mm)		 203 ← 203 203 - - - -
Length to ride hight
adjuster (mm)		 20 ← 45 0 40 ← 58 25
Lever ratio 1.02 1.42(spg) , 1.32(dmp)

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.

Test vehicle information

  F R
Vehicle weight kg 773　(780) 515　(510)
Tire size (Air pressure) kPa 225 / 40 - 18 ( 220 ) 225 / 40 - 18 ( 200 )
Wheel size 8.0 JJ × 18 inset 45 8.0 JJ × 18 inset 45
Alignment
(Toe/Camber)		 Test data in 0 mm / -3°00' out 2 mm / -2°11'
Standard value in 1.8 ± 2.0 mm / -1°23' ± 0°45' in 2.2 ± 2.0 mm / -1°55' ± 0°45'

* Test data at HKS.

Parts List  * It may be changed without prior notice.



Point

・Without sacrificing the stock ride quality, we have achieved a well-balanced level of ride comfort and sports performance, such as roll rigidity
・Damp force characteristics for smoothly driving on street and firm tenacity during fast corning are what we pursued. The stability and controllability at the limit range are much improved.
・After testing several different spring rates, the spring rate is set up to target from driving on the street to winding roads+α.
・If you are planning for hill climbs, mini track, or using high grip tire, we recommend you increase the spring rate.
・Please note that the free length of the spring will be changed for both F and R when the rate is increased. (*) Recommended damp force adjustment setting for rate up is Front: D=15 / Rear: D=13.
・If you are looking for sport driving, we recommend you set the rear toe out, which makes understeer hardly occur, allowing the driver to accelerate earlier while cornering. It improves the vehicle motion control.
・High durability of 3-year/60,000 km coverage has been achieved by reviewing internal components.
 
Recommended range of N/mm (kgf/mm) when changing spring rate: *In case of rate increase, change the length to F=78(8)-170 / R=69(7)-220.

80300-AT025
20 Items
Related Products ( 16 other products in the same category )