SPOON SPORTS REAR BRAKE ROTOR FOR HONDA S2000 AP1 AP2

Specifications:

Manufacturer: Spoon

Position: Rear

Rotors Type: 1Piece Drilled Rotors

Rotors Colours:

Brake rotor Additional machining of conventional mass-produced products As a measure against heat cracks that could not be avoided by drilling holes, we participated in the design of spoons and created flap type casting dies. The reality of parallelism and verticality is reflected in the product while obtaining the ideal strength. By averaging the ideal carbon content of the material, the range of specific gravity values ??can be narrowed, and individual differences between rotors have become a certain level. By precisely arranging the casting core at the hole position, epoch-making strength and cooling performance were obtained. During hard braking, the rotor is cold when entering the caliper (intervention side) and has a high temperature distribution when exiting (intervention side). If this is repeated, the "distortion" that occurs on the rotor surface will be transmitted to the hub and cause "vibration". In addition, the brake feel becomes a sponge when the frame spreads the pad. With the spoon, we aimed not only for those hard braking measures, but also for a rich ride feeling even if you run normally by improving the rotation balance, overall strength, etc. far more than normal.

Remarks & special notes

It is the price of one piece. In the case of one unit, it will be x2.

FITMENT:

S2000 | AP1 | 1999-2003 | NA | F20C | I4

S2000 | AP2 | 2003-2009 | NA | F22C | I4