SPOON SPORTS COUPE HARDTOP HONDA S2000 AP1 AP2

FRP/CFRP construction. Improves aero dynamic effect during mid to high speeds. During endurance racing, fuel efficiency is increased due to less drag. Spoon has tested at the circuit comparing with Mugen hardtop, the Spoon one has achieved 5-15km/hr more during straight line and turns. Designed for race use so fit and finish is functional.

Remarks & Special Notes

(Note) Wax is used in the product manufacturing process, so be sure to degrease before painting.

After that, roughen the surface with waterproof paper of about #800.

Also, there may be small pinholes, scratches, cracks, etc. on the surface, but if you use polyester putty/surfacer to prepare the surface, it will be beautifully finished.

• Be sure to test fit the product before painting.
• The product will deform in environments such as paint booths/heaters, so let it dry naturally without applying heat.
• When the temperature is low, such as in winter, or when the humidity is high, dry the entire product at 40°C or less.
• Do not heat it partially. It may cause distortion.